PROAIM 9CTH-TMP Assembly Manual Download Page 2

Page: 2 / 3

Camera Cage Setup



Insert the 300mm long rods in quick release
rod adapter and Insert the tripod mounting
plate in 300mm long rods & tighten the Knob.



Insert the 300mm long rods into the front and
back 15mm slots on the Cage bracket. Then
insert the set of 200mm rods into the top rod
holder of cage.



Attach the top handle on the front bracket of
cage .Then attach and secure the camera on
the quick release plate.



Insert the quick release into the adapter by
pressing the side locking pin and secure it
with the side knob.

YOUR PROAIM CAMERA CAGE

ALL DRESSED UP AND READY TO GO!

(SHOWN WITH OPTIONAL

ACCESSORIES)

Summary of Contents for 9CTH-TMP

Page 1: ...r transmitted by any form or by any means electronic mechanical photo copying recording or otherwise except as may be expressly permitted by the applicable copyright statutes or in writing by the Publ...

Page 2: ...mm slots on the Cage bracket Then insert the set of 200mm rods into the top rod holder of cage Attach the top handle on the front bracket of cage Then attach and secure the camera on the quick release...

Page 3: ...se or accidental damage Warranty repairs are subjected to inspection and evaluation by us Liability We are not liable for damage caused by products that we do not supply or from mishandling in transit...