19
18
fig. 32
NOTE: Only use the Drive Belt
supplied. Using another belt
could create a hazard and
would invalidate the warranty.
REPLACING THE DRIVE BELT
CLEANING THE U TUBE
6. Remove the Roller Brush lifting it
firmly upwards to release it.
See fig. 31.
2. Unplug the Cleaner from the mains.
7. Replace the worn out Dive Belt
with the new Drive Belt V .
Carefully stretch the new belt over
the Roller Brush and ensure it is
well fitted at the roller ends.
See fig. 31.
8. Refit the Cover in the same way
using the four fixing screws.
3. Release the Handle by pressing
the Handle Release Pedal Q .
Carefully turn the unit over and
remove the four fixing screws.
Ensure you keep all the screws in
a safe place.
See fig. 30.
1. Should the Drive Belt become
worn or slips you can replace with
the spare Drive Belt V included
with the accessories.
Cleaning & Changing the Belt
Base View
Fixing
Screws
fig. 30
4. With the unit still lying down, turn
it around and lift the adjust knob.
5. Lift the cover of the power head
starting from the back of the power
head.
fig. 31
Roller Brush
V
Unblocking The "U" Tube
1. If rubbish is blocked inside the
"U" tube, open the U Tube Cover
P and remove blockage then
close the cover.
See fig. 32.
WARNING : The cover must be
closed whilst vacuuming,
otherwise it will not pickup.
P
