Proaction 908/8573 Installation & User'S Instructions Download Page 9

 

Technical Specifications 

Disposal information

 

 

Model 

OL386 

Voltage 

220-240 V  50Hz 

Current 1.15 

Power Max. 

265W 

Film Thickness  Can Be Used 

160(2 x 60)-250(125 x2) microns 

Max Document Size 

up to A3 size 303 x 426 mm  

Warm up Time   

approx. 3 – 5 mins 

Laminating speed   

approx. 30 cm/min 

Max Document Thickness 

0.6 mm 

Net weight 

1.48kg 

Dimension 

440 x 150 x 65 mm 

 
We apologise for any inconvenience caused by any minor inconsistencies in these instructions, which may 
occur as a result of product improvements and development. 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

This appliance complies with the following EEC directives: 
2006/95/EEC Low voltage directive 
2004/108/EEC EMC directive 

 
 

 

The symbol on the product or its packaging indicates that this product may not be treated as 
household waste. Instead it should be handed over to the applicable collection point for the 
recycling of electrical and electronic equipment. By ensuring this product is disposed of 
correctly, you will help prevent potential negative consequences for the environment and 
human health, which could otherwise be caused by inappropriate waste handling of this 
product. For more detailed information about recycling this product, please contact your local 
council office, your household waste disposal service or the shop where the product was 
purchased. 

 

 

 

8

Summary of Contents for 908/8573











Reviews: