background image

13

 

Preset programme schedules

: The Digital Timer is preset to follow the schedule shown on page 8 

(Schedule A) unless you change the settings. However, instead of changing the settings manually, you 
can choose either of 2 other pre-configured schedules. Schedule B keeps heat on longer if you’re often 
at home. Schedule C keeps heat off longer to reduce energy costs. (See page 23.)

• 

Adjustable time settings

: By default, the Digital Timer has 6 time settings per day (3 periods on, 3 

periods off). You can reduce this to 4 time settings if desired. (See page 22.)

 

Seasonal time change

: The clock automatically changes in spring and autumn to correspond with 

changes to and from daylight savings time. (See page 22 to turn off this feature.)

 

Adjustable clock format

: The screen can display time in either AM/PM format (i.e., 2 pm) or 24-hour 

format (14:00). (See page 22.)

• 

Adjustable backlight

: A bright continuous backlight makes the display screen easier to read. You can 

change its operation so the backlight always remains off or is lit for only a few seconds after each button 
press. (See page 22.)

Advanced features

Summary of Contents for FPP13206

























Reviews: