Pro-X Intellicom 150 User Manual Download Page 11

(UN3480  Lithium  ion  batteries),  name  and  address  of  shipper  and  consignee,  proper  shipping 
name,  etc.  A  dangerous  goods  declaration  that  contains  the  sender  and  consignee  information 
must be submitted to the transporter. 
Limit per package: Passenger aircraft = Forbidden 

Cargo aircraft only = 10kg 

Section II 

applies to lithium ion batteries with a Watt-hour rating not exceeding 100 Wh packed 

in quantities not exceeding 2 batteries in one package (no more than 1 package). Batteries of this 
section are NOT classified as Class9 Dangerous Goods. The package must pass a 1.2 meters drop 
test. In addition, a lithium battery handling label is required on the shipping package. A Shipper's 
Declaration  for  Dangerous  Goods  is  not  required.  An  overpack  must  be  marked  with  the  word 
“Overpack” and labeled with the lithium battery label, unless the label(s) on the package(s) inside 
the overpack are visible. 
Limit per package: Batteries ≤ 100Wh = 2 batteries 

Passenger aircraft = Forbidden 

 
2.

 

Lithium Ion Batteries Packed with Equipment UN3481, PI 966 

 

Batteries must be marked with the Watt-hour rating on the outside case. 

Section  I

  applies  where  the  equipment  is  packed  with  lithium  ion  batteries  with  a  Watt-hour 

rating  in  excess  of  100  Wh,  which  must  be  assigned  to  Class  9  and  are  subject  to  all  of  the 
applicable requirements of these Regulations. The number of cells or batteries in each package 
must  not  exceed  the  appropriate  number  for  the  equipment's  operation,  plus  two  spares.  A 
Class9 label will be needed on the package. 
Limit per package: Passenger aircraft = 5kg 

Cargo aircraft only = 35kg 

Section  II

  applies  where  the  equipment  is  packed  with  lithium  ion  batteries  with  a  Watt-hour 

rating not exceeding 100 Wh. Each package of cells or batteries, or the completed package must 
be  capable  of  withstanding  a  1.2  m  drop  test.  Each  package  must  be  labeled  with  a  lithium 
battery handling label. A Shipper's Declaration for Dangerous Goods is not required. An overpack 
must be marked with the word “Overpack” and labeled with the lithium battery label, unless the 
label(s) on the package(s) inside the overpack are visible. The equipment must be secured against 
movement  within  the  outer  packaging  and  must  be  equipped  with  an  effective  means  of 
preventing accidental activation. 
Limit per package: Passenger aircraft = 5kg 

Cargo aircraft only = 5kg 

 
3.

 

Lithium Ion Batteries Contained in Equipment UN3481, PI 967 

 

Batteries must be marked with the Watt-hour rating on the outside case. 

Section I

 applies where the equipment contains lithium ion batteries with a Watt-hour rating in 

excess  of  100  Wh,  which  must  be  assigned  to  Class  9  and  are  subject  to  all  of  the  applicable 
requirements of these Regulations. A Class9 label will be needed on the package. 
Limit per package: Passenger aircraft = 5kg 

Cargo aircraft only = 35kg 

Section II 

applies where the equipment contains lithium ion batteries with a Watt-hour rating not 

exceeding  100  Wh.  The  number  of  cells  or  batteries  in  each  package  must  not  exceed  the 

Summary of Contents for Intellicom 150













Reviews: