PRO WELD INTERNATIONAL AG-900, Operation & Maintenance Manual

Page: 9 / 24

AG-900
PRO WELD
8. Don’t weld on containers which have held
combustible or flammable materials, or on
materials which give off flammable or toxic
vapors when heated.
9. Be sure to provide for proper ventilation
when welding in a confined area.
10. Never look at the electric arc without
wearing protective eye shields.
11. Always use the proper protective clothing,
gloves, etc.
12. Never strike an arc when near a bystander
who is unaware of the danger of ultraviolet
light to their eyes.
4.0 GENERAL DESCRIPTION
WELD GUN - STANDARD ARC HEAVY DUTY
(Part No. 300-0900)
A shaped to the hand, semi automatic stud welding
tool. Welds any length stud with a diameter range of
5/8 through 1-1/4 inches. Refer to figure 4-1 for
weight and size specifications.
5.0 UNPACKING
There is very little to do when unpacking your ARC
Stud Welding gun. Your Stud Welder comes
complete with all the accessories and tool required
for set-up, adjustment, and maintenance. Aside from
the correct chuck, ferrule grip, and any special
accessories required for your application your ARC
weld gun is ready for hook-up to a Pro Weld power
source.
Weight (includes standard legs,
foot, and 1/0 cables)............. 6.2 pounds...2.8 kg
Typical working weight gun plus
4 feet of unsupported 4/0 cables ..9 pounds...4.2 kg
Shipping weight of gun plus
approximately 8 feet of
4/0 cable and connectors....... 13.5 pounds...6.1 kg
Note: Chuck and ferrule grip are not standard and
must
be ordered separately.
Figure 4-1 Standard ARC HD Weld Gun
9.5
7”
6”
2”
1”
PAGE 2