Pro-Tronik PTR-6A, User Manual

Page: 40 / 44

2 CARACTERISTIQUES
Once the ENTER key is pressed, the menu screen is displayed and features :
10.1 MEMORY SELECTION
1/ From the main screen, press the ENTER button for 3 seconds to display the features menu.
2/ Press one of the UP or DOWN keys to scroll through the 1 to 8 memory.
3/ Once the desired memory number is displayed, press ENTER and EXIT to return to the main screen and use the
selected model memory.
10.2 MEMORY NAME
1/ From the main screen, press the ENTER button for 3 seconds to display the features menu.
2/ Press the EXIT button to select one of the four letters of the name of the current memory. Letter flashes. EXIT button
to select the character to adjust.
3/ Press the UP or DOWN keys to scroll through the characters from the 28 available.
4/ Once the desired character is displayed, press EXIT to select the next letter in the model name and repeat steps 2 and
3 until the model name on the 4 characters.
5/ Press ENTER and then EXIT to return to the main screen and use the selected model memory.
10.3 CHANNELS DIRECTIONS
1/ From the main screen, press the ENTER button for 3 seconds to display the features menu.
2/ Press the ENTER key two times to select the "REVERSE" feature. The screen appears as follows (channel 1 is
automatically selected) :
3/ Press the UP button to reverse the direction of travel of the channel 1 servo(CH1).
4/ Press the DOWN button to select channel 2 (CH2) then repeat steps 3 and 4 until set the direction of travel of each
used channel. DOWN button to select the channel to be adjusted.
4/ Press the ENTER key 5 times to save your settings and return to the main screen.
10.3 DOUBLE THROWS (DUAL RATES)
1/ From the main screen, press the ENTER button for 3 seconds to display the features menu.
2/ Press the ENTER key three times to select the "D / R" feature. The screen appears as follows (channel 1 is automatically
selected) :
3/ Press the UP or DOWN buttons to adjust the rate of travel of channel 1(CH1).
You can keep your finger to continuously cycle the value.
The effect of the setting is immediately visible on the concerned servo.
The reduced travel is obtained when the D / R inter is set downward.
10 FUNCTIONS
ENTER
UP/DOWN
UP
REVERSE feature
UP/DOWN
D/R feature
40
i