Auto Transmitter Register Mode
(Figure 14)
To remove the code from the Receiver push the enter button
and then the manual button. In the manual mode you will see all of
the codes for each of the Transmitters you have in your Receiver. To
remove a coded Transmitter simply scroll down to the Transmitter
you wish to remove, now press and hold the register button for 4
to 6 seconds. The highlighted Transmitter should now be removed
from the Receiver. The LCD screen on the Receiver will show a
number when there is a active Transmitter. The LCD will show you
which Transmitter it is as well as a number indicating the signal.
pg 7
1.5 Antenna and its functions
The specially designed Antenna
(Figure 15) is very sensitive to
the signal being generated by
the Transmitter. Place the BNC
connectors together and push down
turning 1/4 turn to lock in place. The
Antenna is very directional, the more
the Antenna is aimed at the Transmitter or target the higher the
number on the Receiver. Once you have determined the highest
number, move the Receiver with the Antenna left and right to
make sure that the highest number is indicated on the Receiver.
Once you have determined the direction by the highest number
on the Receiver take a reading 50 to 75 yards directly in front of
the Antenna and then walk to that position. Again take another
reading on the Receiver using the same procedure as before. You
will soon arrive at your target.
Figure 14
Figure 15
