6
Note:
Please do not use more than one mobile phone/ tablet to control the system
simultaneously.
Button Control:
•
There is a "TX ID" display on the transmitter, and there are both TX CONNECTED
and RX ID displays on the receiver unit, each of which has a 2 digit display plus 2
adjacent buttons which adjust each digit.
•
Values can be adjusted from 00 through to 99 by repeated button presses.
•
Each receiver can be assigned an RX ID number and when the TX ID channel set
on the transmitter matches the TX CONNECTED on the receiver the channel is
connected.
•
Short press: Press to set IGMP group and display the current set value. The unit
switches automatically to the corresponding IGMP group 5 seconds after the press.
•
Long press: Press and hold for 3 seconds to reset the unit.
Computer software control:
•
Connect a PC to the IGMP Ethernet switch using CAT network patch lead
•
Download the application "HDbitT E-Matrix Control Centre" from http://www.hdbitt.
com/download-matrix/
•
Change the PC's IP address to 192.168.1.XXX (to match the IP address of the TX
and RX units and run the program.
IP setting
•
TX and RX units have their own default IP address, TX's IP is 192.168.1.238, and
RX's IP is 192.168.1.239. Generally, it is not need to change the device IP address,
as the system can work normally even though multiple TX units and multiple RX
units connected into the system with their default IP address.
•
If IP setting is really needed, please follow up the operation as Figure 2 (here make
an example of TX's IP sett ing only, RX 's setting is the same as TX's )
Summary of Contents for PSG3447
Page 1: ...1 HDbitT HDMI EXTENDER MATRIX 60HZ PSG3447...
Page 11: ...11...
