3
•
Plug the IR-TX extender into the IR-IN port of the transmitter. Direct the extender
head towards the remote control sensor on the source device.
•
Connect an HDTV to the receiver output port using a quality HDMI cable.
•
Plug the IR-RX extender into the IR-IN port of the receiver. Direct the sender head
such that it can receive signals from the remote control for your source device.
•
Connect one PSU to the receiver 12V DC socket and connect to the mains supply.
•
Connect the second PSU to the transmitter 12V DC socket and connect to the mains
supply.
•
Power on the signal source and the display.
1. DC12V: Power input.
2. LED status
1 - Power on indicator.
2 - TX/RX connection established.
3 - Indicates signal is being transmitted.
3. HDBT IN: HDBaseT Network connection.
4. HDMI IN and OUT: HDMI signal connection to source and output devices.
5. IR IN: IR signal input to connect with IR receiver extension cable.
6. IR OUT: IR signal output to connect with IR sender extension cable.
Transmitter Panel Connections
Receiver Panel Connections
MAINTENANCE
•
Clean the outside casing with a soft cloth lightly moistened with mild soap and water.
Never use any abrasive or solvents.
•
Do not allow moisture to enter the casing.
