WHAT’s IN THE BOX
OVERVIEW
IMPORTANT SAFETY INFORMATION
INSTALLATION
•
HDMI extender using HDBaseT, transmits HD audio and video signal, with infrared
remote control for added convenience.
•
Extends 1080p video transmission up to 150 meters.
Please read these instructions carefully before use and retain for future reference.
Requirements
•
An HDMI source device with HDMI OUTPUT interface, DVD, PS3, STB, PC etc.
•
A display device with HDMI INPUT port, SDTV, HDTV, projector etc.
•
Network cables UTP/STP Cat5e/Cat6/Cat6A/Cat7 network cables, to IEEE-568B.
•
When using electrical appliances basic safety precautions should always be followed.
•
Check that the voltage indicated on the rating plate corresponds with that of the local
network before connecting the power supply to the mains power supply.
•
Do not expose the units to moisture or dust and keep any ventilation slots clear.
•
Do not connect or disconnect cables while powered on and in use.
•
HDMI 1.3 compatible uncompressed HDMI video signal.
•
Apply HDBaseT extend technology.
•
Supports ultra HD 4kx2k@60Hz and1080p signal over Cat6 up to 150 meters.
•
Support HDCP, CEC, 24 bit deep colour 3D.
•
Support uncompressed LPCM audio and compressed DTS-HD, Dolby True HD.
•
Support use of source device remote control when viewing from an out of sight
location.
•
IR remote function can be used in either direction by switching the IR receiver and
transmitters over depending on required location of the controlling remote control.
•
Automatically identifies and configures a variety of display modes.
•
Simple and convenient plug and play installation, no setting up required.
FEATURES
2
•
HDMI Transmitter
•
HDMI Receiver
•
12V DC PSU x 2 off
•
IR-TX Transmitter
•
IR-RX Receiver
•
User Manual
Connections
•
Connect the signal source equipment to the input port of the transmitter using a
quality HDMI cable.
