OPERATION
INSTALLATION
•
Allows connection of external audio source via wireless BT to an amplifier or
speaker system with standard AUX input.
•
Connect the destination equipment to the output 3.5mm stereo jack socket.
•
Connect the 5VDC PSU to the power input cable socket and plug into the mains
supply and turn the power on..
•
The blue LED will flash three times indicating power is on and the device is active.
•
In standby mode the LED will short flash once every 5 seconds.
•
During pairing mode the LED with flash rapidly at 0.5sec intervals.
•
Once pairing is successful the LED will rapid flash twice every 5 seconds.
•
During audio streaming the LED will long flash once every 5 seconds.
•
Adjust the volume level using the destination equipment volume control.
OVERVIEW
CLEANING & MAINTENANCE
•
Clean the outside casing with a soft cloth lightly moistened with a mild detergent.
•
Never use any abrasive or solvents.
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL & ELECTRONIC
EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic Equipment (WEEE).
Any WEEE marked products must not be mixed with general household waste, but kept separate for the treatment,
recovery and recycling of the materials used. Contact your local authority for details of recycling schemes in your area.
Made in Taiwan
PR2 9PP
Man Rev 1.0
SPECIFICATIONS
Audio Input
Wireless BT
BT Version
V3.0 EDR compliant
BT Receiving Range
10 meters (open space)
Amplifier
24W (RMS) @ 4ohm Stereo Class D
THD
0.1% @ 4ohm, 1kHz
Power Requirements
5VDC 0.5A via PSU
