4
3
2.Installing the columns
1.Installing the Base Assembly
Insert the casters into the holes and tighten the casters
to secure.
Note:
Make sure all casters are at the same height.
Note:
Lock the brakes on the casters to avoid any sudden
movements during installation.
Attach the universal plate to the columns using the
appropriate screws,washers and nuts.
3.Installing the Universal Plate
F
G
A
B
C
D
-C x8
P
E
-H x8
P
P-J
H
I
P-K
P-C x4
P-F x4
-H x4
P
P-D x2
P-E x2
P-L
G
F
Attach the support legs to the base
using the appropriate screws, washers
and nuts.
P-K
Snap the plastic covers onto the base.
Attach the columns to the base using the appropriate
screws and washers, then tighten all screws with the
Allen key.
Tighten all screws but do not over tighten.
Tighten all screws but do not over tighten.
Tighten all screws but do not over tighten.
Note:
Each caster can be adjusted independently
for fine tuning. Slightly turn the nut to lower or
raise the base.
P-J
