ATTACHING THE GRASS CATCHER TO THE MOWER BASE
NOTE:
The mower can be used with or without the grass catcher.
1. Place the grass catcher bracket onto bracket wallboard, then lock
it into place. (fig.4)
2. Place the grass catcher bracket pin onto the adjustable board for
roller (both sides) (fig.5)
Attach the sides of top handle (
$¿J
) subassembly to the sides of
bottom handle subassembly.
Use four knobs (
(¿J
) and
screws(
'¿J
).
Tighten all wing nuts and bolt sets on the handle assembly.
3.
4.
5 .
ATTACHING HANDLE TO THE MOWER BASE
Align holes at the lower end of each handle arm with the short posts
extending from the mower base side plates.
Squeezing handle arms together slightly, slide the lower ends of handle
arms onto posts (
VHH¿J
).
1.
2.
ASSEMBLY
ENGLISH
12
ALR112
fig 5
fig 4
fig.3
