SPECIFICATIONS
OPERATING NOTES FOR BATTERY PACK
Battery must be fully charged for a minimum of 6 hours
before using tool.
Batteries will reach full performance after about five charge/discharge cycles.
3/8" (10 mm) keyless chuck
No-load speed : 0 - 600 RPM
Variable speed reversible trigger with electric brake
Bright LED work light
LCD battery indicator
Magnetic bit holder
No-load speed : 2,200 SPM
0 - 45° bevel cut
No-load speed: 3,300 RPM
Blade size : 5-3/8” (137 mm)
0 - 45° bevel cut
LCD battery indicator
Overload protection
Halogen bulb: 10 watts
90° rotating head with compass
3 - 5 hour charger
2 rechargeable Ni-Cad batteries
2 double-ended screwdriver bits
6 drill bits
8 x 1" (25 mm) screwdriver bits
4 sockets
Magnetic bit holder
Socket holder
2 jigsaw blades
Hex wrench for jigsaw
Circular saw blade
Hex wrench for circular saw
Rip guide
Drill
Jigsaw
Circular Saw
Work Lamp
Accessories:
Always have tool switch in neutral/lock position when removing or
inserting battery to avoid unintentional starting.
T
o remove battery pack from the tool, press the lock spring buttons and pull
out.
T
o insert, simply push pack in until lock spring clicks.
The battery charger consists of two parts:
1.
a combined transformer/110 volt plug with a low-voltage lead
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
a charging stand
T
o charge, connnect the transformer/plug low-voltage lead to the charging
stand.
Insert the transformer/plug into a 120V household current receptacle.
The step of the battery pack has positive and negative terminal marking on it.
Align these with the identical markings on the top of the charging stand and
insert pack into base (Pack will not insert properly if reversed)
20
ENGLISH
CT119-C
The red light is the charge indicato
r
. When the charger is connected to
AC
household current, the red light remains o
ff.
When the battery is properly inserted into the charger and
c
harging, the red
light is on.
