![background image](http://html1.mh-extra.com/html/pro-point/8796690/8796690_user-manual_1607436017.webp)
V1.0
5,000 LB 12V DC ELECTRIC WINCH
8796690
Visit www.princessauto.com for more information
17
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does
not function properly or parts are missing. If unable to do so,
have a qualified technician service the tool.
PROBLEM(S)
POSSIBLE CAUSE(S)
SUGGESTED SOLUTION(S)
Motor
overheats.
1. Incorrect power cord.
2. Winch running time
too long.
1. Use only supplied power
cord.
2. Allow winch to cool down
periodically.
Motor does not
turn on.
1. Solenoid
malfunctioning.
2. Remote damaged.
3. Defective motor.
4. Internal damage or
wear.
5. Remote battery
dead.
6. Loose battery
connection.
1. Tap solenoid to loosen
contacts.
2. Replace remote.
3. Check for voltage at
armature port with switch
pressed. If voltage is present,
replace motor.
4. Have technician service
winch.
5. Replace remote battery.
6. Tighten battery terminal
nuts. Seat cable in winch
socket.
Motor runs
slowly or
without normal
power.
1. Insufficient current or
voltage.
2. Incorrect power
cords.
3. Power connections
corroded/damaged.
1. Connect to appropriate
power supply.
2. Use only supplied power
cords.
3. Clean or replace connectors.
Motor runs in
one direction
only.
1. Defective or stuck
solenoid.
2. Remote damaged.
3. Defective remote
button.
1. Tap solenoid to loosen
contacts.
2. Repair or replace solenoid.
3. Replace remote.
Motor is water
damaged.
Submerged in water or
water from pressure
washing.
Allow to drain and dry
thoroughly, then run the
motor without load in short
bursts to dry the windings.