![background image](http://html.mh-extra.com/html/pro-point/8616484/8616484_user-manual_1607361005.webp)
V1.1
THERMAL IMAGER
8616484
Visit www.princessauto.com for more information
5
IDENTIFICATION KEY
A LCD
B Up Key
C Colour Palette Key
D Down Key
E Unit Key
F Mode Key
G Micro SD
H Mini USB
I
Infrared Lens
J Trigger
K Battery Cover
FUNCTIONS
Press the mode key (F) to scroll through the display functions,
then press the up key (B) or the down key (D) to change the
functions, then press the trigger (J) to confirm the selection.
E
The default emissivity is 0.95. You can select a different
default emissivity: Blackbody (1.0), Matt (0.95), Semi-
matt (0.8), Semi-glossy (0.6) and Glossy (0.3).
Select Set Value to adjust the emissivity rating in 0.01
increments up to 1.0.
HAL
LAL
When the reading is outside the High Alarm (HAL) or
Low Alarm (LAL) limit, the reading shown at the top
right corner of the screen will constantly flash (HAL is
red and LAL is blue) with two short beep sounds. Select
Set HA temp or Set LA temp to adjust the limits or
select ON/OFF to turn on/off the alert.
Fig. 1