Fluxchipper and
Needle Scaler Kit
3
For technical questions call: 1-800-665-8685
8345381
V 1.01
INTRODUCTION
2 tools in 1! Use the chisel tips to chip away hard materials such as welding flux, or use the needle scaler attachment
for lighter material removal, such as rust or paint from metal surfaces.
SPECIFICATIONS
No load speed
4,600 BPM
Average Air Consumption
10 CFM @ 90 PSI
Hose Size
3/8” I.D.
Air inlet
1/4” NPT
Weight
8.6 lb
IMPORTANT SAFETY PRECAUTIONS
WARNING!
Read and understand all instructions before using this tool. Keep this manual for the safety warnings
and precautions, operating, inspection and maintenance instructions. When using this tool, basic precautions
should always be followed to reduce the risk of personal injury and/or damage to the equipment. Note that when
this manual refers to a part number, it refers to the parts list included. Before allowing someone else to use this tool,
make sure they are aware of all safety information.
WORK AREA
1. Operate in a safe work environment. Keep your work area clean and well lit. Do not use in damp or wet
locations and do not expose this tool to rain. Do not use in the presence of flammable gases or liquids.
2. Keep anyone not wearing appropriate safety equipment away from the work area. Distraction can cause you
to lose control.
3. Store unused equipment. When not in use, tools must be stored in a dry location to prevent rust. Always lock
up tools and keep them out of reach of children.
