18V Cordless Drill
9
For technical questions call: 1-800-665-8685
8353906
V 2.0
LED INDICATION FUNCTION
The Battery Pack has a “SW” button and 4-step green LEDs for indicating remaining capacity status and over
temperature condition. The remaining capacity (RC) and temperature protection status green LED indications (3 sec.)
when the “SW” button is momentarily pressed.
Remaining Capacity LED Indication
RC Status
LED 1 (green)
0% to 25%
LED 1, 2 (green)
26% to 50%
LED 1, 2, 3 (green)
51% to 75%
LED 1, 2, 3, 4 (green)
76% to 100%
LED 1 Blinking (0.25 sec/green)
Fully Depleted
LED 1, 2, 3, 4 Blinking (0.5 sec/green)
Over Temperature Condition
THE LED LIGHT ON THE CHARGER
WARNING!
1. Charger is plugged into a 100 to 240V AC outlet only.
2. If the battery pack is too hot or too cold, the charger will not fast charge the battery pack and the red Indicator
light is “blinking”. The charger will automatically begin charging when the battery pack temperature returns to
between 0°C (32°F) and 50°C (122°F).
3. If both red and green indicator lights are “ON” the battery pack either does not comply or is defective. Please
contact your retailer.
4. Do not charge the battery pack in the rain, snow or high temperature environment.
5. Do not charge battery pack when environment temperature is below 0°C (32°F) or above 40°C (104°F)
6. While charge the cool battery pack (below 0°C) in the warm indoor, keep the battery pack in the room for one
hour to warm up before starting the battery pack. A cool battery may charge unsaturated.
7. Remove the plug after finishing the charge.
8. The charger should be cooled at least one hour after continue charging three times.
9. Do not use generator for charging the battery pack.
Power On (Green light
flashes slowly)
Battery charged 100%
(Green light stays
illuminated)
Battery Low (Red light
stays illuminated)
Battery Pack
temperature is too hot
or too cold (Red light
flashes slowly)
Battery charged 80%
(Green light flashes
rapidly)
Battery malfunction
(Red and Green light
stays illuminated)
