41
If any one client has done the EasyConfig successfully, the PSK will be generated and you
may see the encryption key displayed on the EasyConfig page (as shown in Figure-1). When
EasyConfig SSID and PSK are adopted, the EasyConfig LED will be steady on. Please note,
when EasyConfig setting has been generated, you may not be able to change AP setting for
SSID and wireless security any more, unless EasyConfig is disabled.
If “
Q&A
” mode is selected, AP is ready to accept the EasyConfig client request for Q&A mode.
The client side operation will be explained in following sections. If any one client has done the
EasyConfig in Q&A mode with AP, the EasyConfig web page will show “
yes
” on “
Q&A
Installed
” item as shown in Figure-1 to indicate the AP has been configured by Q&A mode. It
implies that any client should select the same question and give the same answer as first client
used when they do the EasyConfig in Q&A mode.
User may click “
Delete Key
” button to delete all installed encryption key, SSID and Q&A value.
Windows Utility Operation (for 8185/8187 Adapter)
Launch Realtek wireless client utility on Windows platform (2K or XP), you will see there is an
Easy Config tab existed, click the tab you will see a interface as shown in following figure:
Figure 2
Here, you may select which method to use for EasyConfig. One is Touch-Button Method
(
Button mode
), and the other one is Question-Answer Method (
Q&A mode
). If you select
Touch-Button Method, and click “
Start
” button, then another Wizard window will be popped as
shown in Figure-3 below:
