manualshive.com logo in svg

Pro-Line Boats PRO-Fusion SC 4x4, Instruction Manual, Page: 19 / 24

Share
Download
Pro-Line Boats PRO-Fusion SC 4x4 Instruction Manual Download Page 19

19

48

Select Body & Tires

Now the fun really begins! The PRO-Fusion SC 4×4 is able to use 
many different body and tire combinations. Make your truck into 
a True-Scale Short Course truck, an ultimate bashing machine, a 
slammed street truck  — the possibilities are endless! 

Visit 

prolineracing.com/pro-fusion-sc4x4

 to see the full lineup 

of options from Pro-Line Racing.

!

 

IMPORTANT

Whichever body or tire style you choose, please note that the 
PRO-Fusion SC 4×4 only accepts 17mm hex sized wheels. 

1. 

Before cutting or making holes in the body 

(if the body is not pre-cut)

, 

put the unpainted body on the chassis to mark mounting position 
and locations for the body post holes.

2. 

Before painting, wash the inside of the body with mild 
detergent such as dish soap, then rinse and dry 
thoroughly.

3. 

Apply window masks to inside of body, 
as well as any masks for painting 
your design. For painting tips, visit 

prolineracing.com/how-to-tips

4. 

Use only polycarbonate-safe paint.

5. 

Allow paint to dry completely.

6. 

Remove window masks and 
   outer fi lm.

7. Apply 

decals.

8. 

Mount body to chassis using 
Secure-Loc Caps.

HARDWARE USED

(ACTUAL SIZE)

B

A

G

 I

BAG I

Install Tires

Install Tires

49

  × 4

× 4

17mm Wheel Nuts

17mm Wheel Nuts

Summary of Contents for PRO-Fusion SC 4x4

























Reviews:

No comments