The navigation lights consist of a pair of stainless steel lights that are
mounted at the bow of the boat. The red light is installed on the port side
and the green light is installed on the starboard side.
The U.S. Coast Guard requires that the anchor/all around light be installed at
the highest point on the boat and must be secured in the up position when
you are underway. Therefore, this light will be installed as follows based
upon the optional top that you may have selected:
•
No optional top – Light will be mounted on the console
•
Bimini top - Light will be installed on the Bimini top frame
•
Rigid T-top – Light will be mounted on the center of the Trylon top.
Spreader Lights and Courtesy Light (Optional)
The installation of the spreader lights and courtesy light requires the optional rigid T-top. The spreader
lights are mounted to the aft side of the rigid T-top frame, next to the rocket launchers. The dome shaped
courtesy light is mounted to the bottom of the T-top storage box.
Two (2) push in switches for the spreader lights and courtesy light are located on the base of the dome
shaped courtesy light.
•
To operate the dome shaped courtesy light - Press the switch labeled courtesy once to
turn on the white courtesy light. When you press the same switch a 2
nd
time, the white
courtesy light will be turned off and the red courtesy light (for night vision) will turn on.
Press the same switch a 3
rd
time to turn off the red courtesy light.
•
To operate the spreader lights - The spreader light switch operates in the same manor as
the courtesy light but only needs to be pressed in once to be turned on and once again to
be turned off.
Spreader
Lights
Courtesy/Dome
Light
Remote Spot Light (Optional)
The installation of the remote spot light requires the optional rigid T-top. The remote spot light is mounted
to the forward area of the Trylon top. To operate the remote spot light, locate the remote spot light panel
that is installed on the console.
The switch on the right side of the panel allows you to turn the light on and off. The red LED light located
in the center of the panel will be lit when the spot light is turned on. Once the spot light is turned on, the
all around toggle lever (also located on the remote spot light panel) can be moved in an up, down, left or
right position to rotate the light assembly in the desired direction.
20
