bilge and is accessible via the bilge hatch. The automatic float switches are installed in close
proximity to each of the bilge pumps.
The bilge pump is wired automatic to the battery and has a manual override located at the switch
panel on the console. The automatic float switch is wired directly to the
Starboard
battery
terminals through breakers or inline fuses. The circuit breaker is located at the helm next to the
manual switch. Depressing the bilge pump switch to the up or forward position activates the bilge
pump.
Depressing the applicable bilge pump switch (Forward Bilge 1 or Aft Bilge) to the up or forward
position activates the corresponding bilge pump. Depressing the applicable bilge pump switch to
the down or aft position turns the pump off.
6 Fish Box Pump - This switch directs power to the fish box macerator pump, which allows you to
drain the water and debris from the aft fish boxes. The macerator pump allows you to pump all
the water, ice and scales out of the aft fish boxes by grinding up the debris and discharging it
overboard.
To activate the pump, depress the switch to the up or forward position. This action will drain the
fish boxes of water and/or debris and transport it to the macerator pump to be macerated and/or
discharged overboard. When not in use, the switch should be left in the off position.
7 Baitwell Pump - The baitwell pump is located in the bilge area and is plumbed to a seacock (ball
valve). For the pump to operate properly you need to make sure the seacock is in the open
position. The seacock is wide open when the yellow seacock lever is vertical. When the yellow
seacock lever is horizontal, the seacock is closed.
The underside of the seacock thru-hull is equipped with a scoop to allow the water to be picked up
even when the boat is on plane. When the boat is not in the water or the baitwell pump is not
going to be used for an extended period of time, the seacock valve should be in the closed
position. To activate the pump, depress the switch to the up or forward position. To turn the
pump off after the baitwell tub is full, depress switch to the down or aft position.
See the Sea Water section of this manual for additional instructions on the operations of the
pump.
8 Washdown Pump – To activate the washdown pump, which is located on top of the starboard aft
stringer, depress the switch to the up or forward position. The washdown pump draws its water
from the same seacock that the baitwell pump draws its water. To turn the pump off, depress the
switch in the down position. Keep the washdown switch in the off position if the pump is not going
to be used soon.
9 Fresh Water – The fresh water switch provides power to the fresh water pump. Depress the fresh
water switch to the forward position to activate the fresh water pump. The fresh water
faucet/nozzle is installed behind a white cap located just out side the transom door. Press the
button on the handle to activate the faucet/nozzle. If the fresh water system is not going to be in
use, stow away the hose and move the switch to the aft or down position to turn the pump off.
10 Baitwell Light - To activate the baitwell light, depress the switch to the up or forward position. This
will activate the LED (light emitting diode) light inside your baitwell tub. It is a soft white light that
will keep your bait moving and lively. It will also help you locate your bait on those early morning
or late night fishing trips. To turn the light off, simply depress the switch to the down or aft
position.
19
