Windows
Two (2) styles of windows have been installed in the cabin.
Cabin Hatches - A cabin hatch complete with screen is installed
in the ceiling of the main cabin. To open
the window, remove the
screen, turn both levers forward and push the hatch open to the
desired position. To hold the hatch in place, tighten the black
plastic cylinders on both of the mounting arms. Then replace the
screen. DO NOT allow passengers to sit or stand
ey could break the hatch. The hatch should be in the closed
on the hatch as
th
and latched position when the vessel is underway.
Cabin Portholes - Two portholes co
installed in the main cabin. To op
loosen the 3 star nuts by turning them in
clockwise direction. Then, rotate each of the star nuts
down/away from the plastic window; the window is hinged
t the top. Once the star nuts are out of the way, lift the
halanges at the bottom of the window.
There is a black p
on each mounting
lastic cylinder
arm.
mplete with screens are
en the porthole window,
a counter
a
window open and away from the frame by pulling on the
p
When finished, close the window, rotate each of the star
nuts back into place and turn the star nuts in a clockwise
direction to secure the window.
Cabin / Companionway Door
The acr
locking
latch an
cabin door assembly:
ard the deck to release the latch.
•
Lift the cabin door hatch, fold it back at the hinge and allow it to set on the top of the
the cabin door hatch in place
the door on the port side with
while making sure that the door stays in the
track of the doorframe.
•
Unfold th
set on the top of the door opening.
•
Press down slightly on the top of the cabin door hatch and the latch will engage itself.
hen the door is open, take notice of the prevailing seas. The door should never remain open when you
are underway or when conditions might cause a passenger to lose their balance and accidentally fall
through the doorway.
ylic cabin/companionway door assembly is equipped with a cabin door, cabin door hatch,
d a magnetic latch to hold the door in place when it is open.
To open the
•
Press the latch on the latch assembly downward tow
console. Two (2) straps with snaps are provided to secure
when open.
•
Fold the cabin door to the port side at the hinge and secure
the magnetic latch.
To close the cabin door assembly:
•
Release the magnetic latch by pressing on the lever.
•
Move the cabin door to the starboard side
e cabin door hatch and allow it to
W
31
