18
If you find it necessary to run the baitwell pump while you are underway, you may be forcing more water
than necessary up through the seacock. In this instance, adjust the seacock lever to a 45
o
angle so that
the seacock is only halfway open. The seacock lever may require additional adjustments to find a setting
that works best for you.
Even when the baitwell pump is turned off, if the seacock is open, the baitwell tub will continue to fill with
water while you are underway.
Bilge Pump
The boat is equipped with a 500-gph bilge pump. This pump
is installed as far aft as possible in the bilge.
There are 2 steps in properly checking the bilge pump. First,
turn the bilge pump on at the instrument panel by pressing
the bilge pump switch to the on or forward position. When
the bilge pump switch is in the on position, the switch light
should be illuminated. To check and see if the bilge pump is
operating, open the bilge hatch over the bilge pump and listen
to hear the bilge pump running.
Second, turn the bilge pump off at the instrument panel and check the bilge pump float switch. The bilge
pump is equipped with an automatic float switch (white box) that is mounted in close proximity to the
pump. As long as your boat is equipped with an operable battery, the pump will operate automatically
when water is present in the area. The float switch is equipped with two plastic knobs located on either
side of the switch. Turn either one of the knobs to raise the float to engage the bilge pump. If the pump
comes on, the automatic float is operating properly. It is recommended that you check the operation of
the automatic float switch monthly.
Fuel/Oil Systems
Fuel Tank
The 40-gallon fuel tank (Inca Molded Products) on your Pro-Line is constructed of flame resistant cross-
linked high-density polyethylene. The fuel tank is located under the deck and is secured between the
stringers and bulkheads.
Located below the access pie installed
aft of the console and forward of the helm seat.
Located below the access pie installed
inside the console.
Inspect all hose connections on a regular basis. You can access the other end of the fuel fill and fuel vent
hoses via the 6” deck plate that is installed just below the fuel fill on the inside the cockpit.
Float Switch
Bilge Pump
Baitwell
Pump
Fuel Sender
Manufacturers
Label
Fuel Vent Hose
Fuel Fill Hose
Fuel Pick
Up