5
Programming
Both the left and the right mode can be programmed to a brightness of your choosing,
providing an easy access to commonly used output levels. Unlike all the other functions,
programming cannot be done using the ring only - you will have to twist the tailcap at one
point, which requires the use of two hands or flipping the light while holding it
single-handedly.
To program your Spartanian II, refer to the following steps:
‣
switch on
in mode you wish to program (
left mode
or
right mode
)
‣
dial the output by
TL
and
TR
to desired level
‣
un-screw
then
re-screw
the tailcap
‣
resume normal operation
Note!
- Latch delay
Although their output level can be reprogrammed, there's one aspect of Spartanian's
modes that always remains he same - you have to hold the ring for 6 seconds to get
the
left mode
to "latch" on and only 1.5 seconds to get the
right mode
to "latch" on.
This distinction is purposeful and exists to make one mode better suited for momentary
action and the other more practical for constant-on applications.
Spartanian II
6
i
