1
SAFETY AND GENERAL INFORMATION
Save these instructions.
For your safety, read, understand, and follow the information provided with and on this
product before using. The owner and operator of this equipment shall have an understanding of this product and
safe operating procedures before attempting to use. The owner and operator shall be aware that use and repair of
this product may require special skills and knowledge. Instructions and safety information shall be conveyed in the
operator's native language before use of this jack is authorized. If any doubt exists as to the safe and proper use of
this product, remove from service immediately.
Inspect before each use.
Do not use if broken, bent, cracked or damaged parts are noted. Any equipment that
appears damaged in any way, or operates abnormally shall be removed from service immediately.
1. Work Area
Use only in well lighted area. Do not work in areas with flammable liquids, gases or dust. Take care not to trip over
the power cord and keep children and bystanders away from work area.
2. Electrical Safety
Your buffer is equipped with a polarized plug which fits into an outlet in only one way to enhance your safety. Do
not alter the plug or attempt to force it into an outlet in which it will not fit. Inspect the power cord before each use
and do not use if it is cracked or frayed. Never carry the buffer by its cord or pull on the cord to remove it from an
outlet. If you must use an extension cord, use one marked, “Suitable for Use with Outdoor Appliances.”
In order to reduce the risk of electrical shock, do not use the buffer when wet or near moisture. Dry vehicle before
using buffer.
3. Personal Safety
Keep fingers away from the ON/OFF switch when carrying the buffer to avoid accidental starting. Make sure
the buffer is off before connecting to electrical source. Remove adjusting keys or wrenches before starting the
buffer
– loose objects may be thrown during operation and cause injury. Disconnect tool from power source before
making any adjustments, changing accessories, or storing. Preventative measures reduce the risk of starting the
tool accidentally. Keep hands away from rotating parts.
Use safety equipment. Always wear eye protection, a dust mask, nonskid safety shoes, and hearing
protection.
Do not overreach while buffing. Maintain proper footing and balance at all times to enable better control of the
tool in unexpected situations.
4. Tool Use and Care
Examine polisher carefully before each use and do not use if damaged in any way, especially if the ON/OFF switch
is damaged. Any tool that cannot be controlled with the ON/OFF switch is dangerous and must be repaired.
Keep away from children and other untrained persons. Electrically powered tools are dangerous in the hands
of untrained users.
Use only parts and accessories recommended by the manufacturer for this tool. Accessories suitable for one
tool may be hazardous when used on another tool.
5. Service
Any maintenance, other than specified in this manual, must be performed by qualified personnel. Maintenance
by unqualified persons could result in injury and damage to property. When performing repairs specified in the
maintenance section of this manual, follow all instructions.
SPECIFICATIONS
Model : I-4506
Manufacturer's Part No. Q1P-GW08-6-2 (W2007)
Features : 6” pad, slide ON/OFF switch, double
insulated, 0.3m power cord
Power Requirement : 120V AC/60Hz
Rated Current : 0.4A
Speed : 3500 rpm
Model : I-4510
Manufacturer's Part No. Q1P-GW08-240 (W2001)
Features : 10” pad, slide ON/OFF switch, double
insulated, 0.3m power cord
Power Requirement : 120V AC/60Hz
Rated Current : 0.65A
Speed : 3200 rpm
