© Pro-Ject Audio Systems · VC-E · Revision 2020.02.03
6
Maintenance and cleaning
Your record cleaning machine requires little to no regular maintenance.
The internal tank has a substantial capacity and subsequently takes a very long time to reach full
capacity. Common home use of the unit does not require to empty the tank. In rare case the tank
should be emptied:
1. disconnect the mains cable
2. Turn the VC-E up to drain the unit reservoir to a big container.
3. Clean the liquid on the body of the unit using a cloth
Regularly check the velvet strips on the arm. Make sure they are clean, no dirt or debris is present.
Prior to maintenance, always disconnect the record cleaning machine from the power outlet!
Technical specifications Vinyl Cleaner VC-E
Nominal speed
30 r.p.m.
Power consumption
230V/800W, 120V/360W, 100V/250W
Dimensions (W x D x H)
310 x 210 x 266 mm (fully assembled)
Weight
6,5kg (netto)
Fuse
T6,3A
Potential incorrect use and fault conditions
Pro-Ject products are manufactured to the highest standards and undergo strict quality controls
before leaving the factory. Faults that may possibly occur are not necessarily due to material or
production faults but can sometimes be caused by incorrect use. Some of these faults are as follows:
The platter doesn't turn although the unit is switched on:
•
The power cord is not connected to the unit.
•
The power cord is not plugged in to the AC wall outlet.
•
Broken fuse in the main switch.
•
Overheating protection is active.
•
Top clamp plate is not tightened properly.
