© Pro-Ject Audio Systems · Pro-Ject USB Box S+ · Revision 2015.4.2
4
Technical specifications Pro-Ject USB Box S+
Line-level output:
1 pair RCA/phono sockets
Output voltage:
2,1Vrms
D/A converter:
Burr Brown PCM5102. 32-Bit Delta Sigma
Supported audio format:
PCM (LPCM). No support for formats like Dolby
®
Digital or DTS
™
Sampling rate:
44,1/48/88,2/96/176/192/352,8/384kHz
USB input:
USB B socket
USB signal:
digital serial data protocol USB 2.0
Dimensions W x H x D (D with sockets): 103 x 36 x 104 (109)mm
Weight:
576g
Service
Should you encounter a problem which you are not able to alleviate or identify despite the above information,
please contact your dealer for further advice. Only when the problem cannot be resolved there should the
unit be sent to the responsible distributor in your country.
Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions
for use. Modification or change to any part of the product by unauthorized persons, release the
manufacturer from any liability over and above the lawful rights of the customer.
Copyright, trademarks
Pro-Ject Audio Systems is a Registered Trademark of
H. Lichtenegger.
This guide was produced by: Pro-Ject Audio Systems
Copyright
©
2015. All rights reserved.
The information was correct at the time of going to
press. The manufacturer reserves the right to make
changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing
process of technical development.
Windows XP
®
, Windows Vista
®,
Windows 7
®
and Windows 8
®
are trademarks of the Microsoft group of
companies. Mac
®
and Mac OS
®
are trademarks of Apple Inc., registered in the U.S. and other countries.
Dolby
®
is a registered trademarks of Dolby Laboratories. DTS
™
is a registered trademark of DTS, Inc..
