Pro-Ject Audio Systems Pro-Ject Receiver Box Instructions For Use Manual Download Page 5

© Audio Trade GmbH · Pro-Ject Receiver Box · Revision 1.2.10/1.3.10

 

5

Manual program search 

Press the rotary selector repeatedly until the display shows 

MANUAL

. By rotating the rotary selector the reception 

frequency will be increased or decreased in 50kHz steps. The tuner is correctly adjusted for a stereo broadcast 
when 

A

  the largest number of bars are shown (signal strength meter) and 

B

  two loudspeaker symbols are shown (

F

  one loudspeaker symbol shows mono reception) 

C

  the vertical bar is centred in the fine tuning display   

Automatic program search 

Press the rotary selector repeatedly until the display shows 

AUTO

. Rotating the rotary selector clockwise starts 

the automatic frequency scan upwards, anticlockwise starts it downwards. The maximum signal strength will 
be adjusted automatically for each program found.

 

Program selection from memory 

Press the rotary selector repeatedly until the display shows 

MEMORY

. Rotating the rotary selector clockwise 

will select the program with the next memory position up the list, anticlockwise will select the program with 
the next memory position down the list. The program’s memory position is shown to the right of 

MEMORY

 in 

the display.

 

Saving a program in the memory list 

The memory of the Pro-Ject Receiver Box can store up to 99 programs. Tune to the frequency of the program 
to be stored. Press the rotary selector twice in rapid succession. The display will show 

STORE

. Rotating the 

rotary selector clockwise will select the next memory position up the list, anticlockwise will select the next 
memory position down the list. Press once on the rotary selector to store the program at that position. The 
display shows 

STORED

 

Saving a program to a particular memory position overwrites any program already stored at that 

position.  The memory retains its contents through a power off/on cycle.

 

Replacing batteries 

Proceed as follows: 

• 

Slide open the battery case cover 

• 

Replace the battery. Make sure the battery is the right way round 

• 

Refit the battery case cover 

Battery type: 1 x CR 2025 / 3V

 

 

Do not dispose the batteries as ordinary domestic refuse. Please dispose your exhausted batteries at 
the appropriate collection sites - usually located at supermarkets and drugstores. 

Reviews: