Pro-Ject Audio Systems Primary E Phono Instructions For Use Manual Download Page 4

© Pro-Ject Audio Systems · Pro-Ject Primary E Phono / Pro-Ject 8.6E · Revision 2018.08.14 

 

4

Dear Music Lover, 
 
Congratulations  and  thank  you  for  choosing  Pro-Ject Audio Systems record player.   
 
Your Primary E Phono turntable has been handcrafted and rigorously tested by skilled technicians 
to  give  you  years  of enjoyable, trouble free service. 

Please contact your dealer if you require additional assistance. 

 
Important: 

Your  turntable  was  shipped  partially  disassembled  in  order  to  avoid  damage  to  sensitive  parts. 
Please  check  immediately  to  make  sure  that  neither  the  packaging  nor  the  device  was  damaged  in 
transit.  If  you  are  missing  parts  or  if  the  unit  is  damaged,  please  do  not  operate  and  contact  your 
dealer. 

Safety instructions 

 

The power supply is used to connect and disconnect the unit from the mains. Make sure that the 
plug  is  easily  accessible  at  all  times.

 

Hold  the  plug  when  unplugging  the  power  cord.  Never 

handle the power cord while your hands are wet or damp. 

Avoid letting liquids enter the device. Never place any item containing liquid, like a flower vase, 
on or near the device. Never spill any liquid on the device. Never place any naked flame sources, 
like lighted candles, on or near the device. The product shall not be used in damp or wet locations, 
next to a bathtub, sink, swimming pool or any other similar conditions. 

Keep plastic bags away from children to prevent any risk of suffocation. 

 

 

Platter and drive belt installation 

Please remove brown paper insert which holds the platter in transport position. Put the felt mat on the 
top of the platter. Install the drive belt as shown in the following illustration. 
 
 

 

 
 
 
 
 

 

!

Summary of Contents for Primary E Phono










Reviews: