© Pro-Ject Audio Systems · Pro-Ject Phono Box DS2 USB · Revision 2016.10.11
5
Setting the record level
The record level knob on the front panel is used to set the level of the analogue signal going to the A/D
converter. A clipping LED indicates when the level is too high and the signal is distorted.
Technical specifications Pro-Ject Phono Box DS2 USB
A
Typical for low output MC cartridges,
B
typical for MM or high output MC cartridges
* Input capacitance is irrelevant for low-output MC cartridges
Input impedance:
10, 20, 50, 100, 200ohms, 1000 ohms and 47kohms
A
Input capacitance/impedance:
47pF, 147pF, 267pF and 367pF */47kohms
B
Input gain:
40, 45, 50, 60, 65dB
Noise floor:
80dB (A weighted) at 40dB input gain
THD:
<0,02%
RIAA-equalisation curve accuracy:
20Hz - 20kHz / max. 0,3dB
Subsonic filter:
at 20Hz with 12dB/octave
Phono Inputs:
2 pairs RCA/phono sockets
Line input:
1 pair RCA/phono sockets
Line output:
1 pair RCA/phono sockets
Digital outputs:
1x USB B-type
1x S/PDIF coaxial
Outboard power supply:
18V/500mA DC, suitable for your country's mains supply
Power consumption:
100mA DC, <1W in standby
Dimensions W x D x H (D with sockets):
206 x 227 (239) x 70,6 mm aluminium
240 x 227 (239) x 72 mm wood (including wooden side panels)
Weight:
1500g aluminium, 1780g wood (without any accessories)
