INSTRUCTIONS FOR USE
Measure it
Page 1: ...INSTRUCTIONS FOR USE Measure it ...
Page 2: ...The display shows the tracking force 4 Lift the tonearm and adjust the counter weight tracking weight dial and repeat the above procedure the recommended tracking force is achieved Never load the stylus balance with more than 5g overloading can permanently damage it Special calibration if the display shows OUTZ after turning on 1 Turn off the meter with the ON OFF button 2 Press and hold the TARE ...
Page 3: ... calibration using a 5g weight Auto off 120 seconds off Replacement battery 2 x LR43 1 5V Operating temperature 0 40 C What is in the box stylus balance calibration weight 2 replacement batteries protection bag for the meter user guide Warranty The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use Modification or change to any part of the produc...
