© Audio Trade GmbH · Pro-Ject Dock Box F · Revision 10.2.09/1.4.09
2
Dear music lover,
thank you for purchasing a PRO-JECT AUDIO Dock Box.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
!
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
Connectors
!
Make all connections whilst the Dock Box is disconnected from the power supply.
!
Take care to connect the left and right channels correctly. The right channel is usually marked red,
the left channel black or white.
Connection to the amplifier
Connect the
Out
socket to a line input (such as
AUX
) on your amplifier.
Connecting to a computer
Connect the USB-output of the Dock Box to a free USB-socket on your computer and turn it on/make sure it
is powered on.
Connection to a TV-set or a beamer
Connect the
S-VIDEO
socket to a s-video input of your TV-set or beamer.
S-VIDEO output not compatible with the models iPod
®
nano 3
th
and 4
th
gen, iPhone
®
, iPod
®
Touch
and iPod
®
Classic 6
th
gen.
Fitting and adjustment of the iPod
®
cradle
Use the knurled screw supplied to fix the cradle to the Dock Box chassis. Do not fully tighten the screw yet.
Now place your iPod
®
on the Dock Box contacts. Move the cradle so that it supports the iPod
®
and tighten
the screw.
Suitable for iPods
®
with 30-pole connector only (iPod
®
nano 3
th
and 4
th
gen only)
!
Use without the cradle breaks the 30-pole connector of the Dock Box and the socket of the iPod
®
.
Loading the battery
When the Dock Box is connected to the mains power supply, the iPod
®
will start recharging as soon as it is
placed on the contacts. Recharging will continue even if the Dock Box is on standby.
To charge the battery of the models iPod
®
nano 4
th
gen, iPhone
®
G3 and iPod
®
Touch 2
th
gen an
USB-charger (not supplied) has to be connected to the USB-output of the Dock Box.
Mains power connection
The unit is supplied with a power supply suitable for your country's mains supply. Check the label before
connecting to ensure compliance with the mains rating in your house. Connect the low voltage plug from the
power supply to the
Power ~16V
socket before connecting the power supply to the mains.
