© Pro-Ject Audio Systems · Pro-Ject DAC Box E · Revision 2014.4.10
3
Technical specifications Pro-Ject DAC Box E
Line-level output:
1 pair RCA/phono sockets
Output voltage:
0,7Vrms
Digital outputs:
1 x coaxial (S/PDIF),
1 x optical (TOSlink
®
)
D/A converter:
Cirrus Logic CS4344. 24Bit/192kHz
Supported audio format:
PCM (LPCM). No support for multi channel formats like Dolby
®
AC-3 or DTS
™
Sampling rates
Optical and coaxial input:
44,1kHz, 48kHz, 96kHz and 192kHz (coaxial)
Outboard power supply:
18V/500mA DC
Power consumption:
200mA DC, <1W in standby
Dimensions W x H x D (D with sockets): 120 x 32 x 100 (106)mm
Weight:
250g without power supply
Service
Should you encounter a problem which you are not able to alleviate or identify despite the above information,
please contact your dealer for further advice. Only when the problem cannot be resolved there should the
unit be sent to the responsible distributor in your country.
Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions
for use. Modification or change to any part of the product by unauthorized persons release the
manufacturer from any liability over and above the lawful rights of the customer.
Copyright, trademarks
Pro-Ject Audio Systems is a Registered Trademark of
H. Lichtenegger.
This guide was produced by: Pro-Ject Audio Systems
Copyright
©
2014. All rights reserved.
The information was correct at the time of going to
press. The manufacturer reserves the right to make
changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing
process of technical development.
TOSlink
®
is a registered trademark of Toshiba corporation. Dolby
®
is a registered trademarks of Dolby
Laboratories. DTS
™
is a registered trademark of DTS, Inc..
