Pro-Ject Audio Systems DAC Box DS Instructions For Use Download Page 3

Page: 3 / 4

Mains power connection

Connect the low voltage plug from the power supply to the Power 18V

socket before connecting the power

supply to the mains.

Front panel controls

DAC Box DS

FILTER

INPUT

To switch on from standby or to standby

will toggle the DAC between its fully operational status and standby.

Input selector

Pressing INPUT repeatedly selects the digital inputs in turns. The selected input and the sampling frequency of

the input signal will be shown in the display.

Filter

FILTER will toggle between the two filters available. The selected filter will be shown in the display.

24Bit/192kHz driver (Windows® operating systems only)

For Windows operating system a 24Bit/kHz192 driver must be installed.

Insert the included CD into the drive of you PC and follow the instructions.
Complete the installation by restarting the computer.

Summary of Contents for DAC Box DS

Page 1: ...INSTRUCTIONS FOR USE Pro Ject DAC Box DS...

Page 2: ...The product shall not be used in damp or wet locations next to a bathtub sink swimming pool or any other similar conditions Connectors 18V Make all connections except the connection to the computer wh...

Page 3: ...us and standby Input selector Pressing INPUT repeatedly selects the digital inputs in turns The selected input and the sampling frequency of the input signal will be shown in the display Filter FILTER...

Page 4: ...he above information please contact your dealer for further advice Only when the problem cannot be resolved there should the unit be sent to the responsible distributor in your country Warranty The ma...