© Audio Trade GmbH · Pro-Ject CD Box · Revision 2012.3.1
2
Dear music lover,
thank you for purchasing a PRO-JECT AUDIO CD Box S.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
!
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
Caution! Laser diode
This product contains a laser diode of higher class than 1. To ensure continued safety, do not remove any
covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel.
Discs to avoid
If a disc is cracked, chipped, warped, or otherwise damaged, don't risk to play it. You could end up damaging
the unit.
This player is designed for use with fully circular, full size CDs only. Use of shaped discs is not
recommended. The manufacturer and the distributor disclaims all liability arising in connection with the use
of damaged or shaped discs.
Connectors
Pro-Ject Audio Systems, Vienna, Austria
!
Make all connections whilst the converter is disconnected from the power supply.
Take care to connect the left and right channels correctly. The right channel is usually marked red,
the left channel black or white.
Connection to the amplifier
Connect the Out socket to a line input (such as AUX) on your amplifier.
Connection to a external A/D-converter
Connect the Co-axial out socket to a coaxial digital input on the D/A converter or AV processor. Doing so
allows you to use the signal in its digital for further digital processing.
Mains power connection
The unit is supplied with a power supply suitable for your country's mains supply. Check the label before
connecting to ensure compliance with the mains rating in your house. Connect the low voltage plug from the
power supply to the Power 9V
"
socket before connecting the power supply to the mains.
!
Never use any other power supply than the one supplied with the unit.
