© Pro-Ject Audio Systems · CD Box DS3 · Revision 2022.02.17
2
Dear music lover,
thank you for purchasing a Pro-Ject Audio Systems CD player.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
Caution! Laser diode, discs to avoid, safety instructions
This product contains a laser diode. To ensure continued safety, do not remove any covers or attempt to
gain access to the inside of the product. Refer all servicing to qualified personnel.
If a disc is cracked, chipped, warped, or otherwise damaged, don't risk to play it. You could end up
damaging the unit. This player is designed for use with fully circular, full size CDs only. Use of shaped discs
is not recommended. The manufacturer and the distributor disclaims all liability arising in connection with
the use of damaged or shaped discs.
AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the
voltage in your area meets the voltage requirements printed on the power supply.
The power supply is used to disconnect the unit from the mains. Make sure that the power supply is easily
accessible at all times.
Never handle the device, the power supply while your hands are wet or damp.
Avoid letting liquids enter the device or the power supply. Never place any item containing liquid, such
as a flower vase on or near the device. Never spill any liquid on the device or the power supply. Never
place any naked flame sources, such as lighted candles on or near the device. The product shall not be used
in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar conditions.
Shape and condition of data carriers
If a CD is broken, chipped or otherwise damaged, it should not be played as it may damage the unit.
The device is only designed to play round CDs with 12cm Ø. Playing self-burned CDs that do not
comply with the Red Book standard may cause the unit to malfunction. The same applies to CDs with
stickers or chamfered outer edges.
Connectors
Make all connections whilst the CD player is disconnected from the power supply.
Never use any other power supply than the one supplied with the unit.
Mains connection and switching the device on and off
Connect the low voltage plug from the power supply to the Power 18V socket of the unit before connecting
the power supply to the mains. The device can be switched on and off with the push button on the front.
