© Pro-Ject Audio Systems · Pro-Ject CD Box DS2 · Revision 2018.12.03
3
2.
Remote power on - triggers
The unit can be switched on via other Box Design components when a 12V trigger voltage is present at
the 2.5mm socket marked
Trigger Input.
Special power-on cables (polarity
) in diverse lengths
are available as accessories. The remote power-on signal can be relayed to further units via the
Trigger
Output
socket. When the 12V trigger signal is switched off, the unit will also switch off.
Trigger cables may only be plugged into the sockets when the unit is disconnected from the
power supply and from the mains. Failure to do so may result in damage of the unit.
Line level Output Var/Fix switch
Select
Var
to control the output level of the line level output using the remote control.
Fix
sets the level
to the maximum. A change is only possible when the unit is turned off
– the switch has no function when
the unit is turned on.
Remote control
Power
turns the unit on/off
CD, Opto1
,
Opto2
,
Coax
,
USB
selects the
input (alternatively left and right arrows select
inputs in turns)
Mute
enable/disable mute function
EJECT
ejects the disc
FILTER -
selects filter - see chapter filter for
further info
Shuffle
- activates random track play
Repeat
- press the button repeatedly for
selecting repeat modes: repeat current track /
repeat for all tracks
Play/Pause/Stop/Next/Previous
acts in the
same way as front panel buttons
If the switch on the backpanel is set to
Var
then using the two blank buttons above and
below the button
“CD” allows to control the
level of the line output.
+
