© Pro-Ject Audio Systems · Pro-Ject Pre Box RS2 Digital · Revision 2019.08.14
2
Dear music lover,
thank you for purchasing a Pro-Ject Audio Systems preamplifier.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
Warning of a hazard for the user, the unit or possible misuse
Important notice
Safety instructions
AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the
voltage in your area meets the voltage requirements printed on the power supply.
The power supply is used to disconnect the unit from the mains. Make sure that the power supply is easily
accessible at all times.
Never handle the device or the power supply while your hands are wet or damp.
Avoid letting liquids enter the device or the power supply. Never place any item containing liquid, such
as a flower vase on or near the device. Never spill any liquid on the device or the power supply. Never
place any naked flame sources, such as lighted candles on or near the device. The product shall not be used
in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar conditions.
Connectors
Make all connections whilst the preamplifier is
disconnected from the power supply
.
Take care to connect the left and right channels correctly. The right channel is usually marked red,
the left channel black or white.
Never use any other power supply than the one supplied with the unit except of Pro-Ject Power Boxes
which can replace original power supplies.
Analogue outputs
The unit offers following analogue output sockets:
1 pair of XLR connectors for balanced output
1 pair of RCA connectors for unbalanced output
Headphone Jack 6,3mm - socket on front panel
Inputs
USB
is dedicated to connection to a Computer. Connect the USB-input of the unit (unit must be switched on) to a
free USB-socket on your computer and turn it on/make sure it is powered on.
