© Pro-Ject Audio Systems · Pro-Ject Bluetooth Box E (9V) · Revision 2014.07.31
3
Bluetooth pairing
Pairing with devices with Android OS
Open Settings and tap on Bluetooth. Turn on Bluetooth and tap on Scan. Searched devices will show up.
Tap on "BT Box E" (Confirm pairing code if requested). Once paired it will show "Connected to media
Audio", now you can play music from your Android device over Bluetooth to Bluetooth Box E.
Pairing with Apple devices
Tap on Settings, tap on Bluetooth, turn on Bluetooth, your device will automatically start searching for
available devices. Tap on "BT Box E" and it will be connected to the Bluetooth Box E. Now you can play
music.
It´s possible to use Bluetooth Box E also with other than above mentioned devices, pairing procedure
is always similar.
Reconnecting
If you move out of range or turn off Bluetooth, Bluetooth Box E will disconnect from your device. To
reconnect simply open the Bluetooth manager and tap on "BT Box E". If the signal is lost for only a few
seconds it can reconnect automatically - typically if you move out of the range and then return back.
Adding a new phone or tablet
The unit can play music from one device at a time, but it is capable of being paired to up to 8 devices. If you
want to switch from one device to another, you have to disconnect existing connection to Bluetooth Box E
and then follow the steps for pairing with new device.
Troubleshooting
No music from speakers:
- make sure the Bluetooth Box E is powered
- make sure an audio cable or an optical cable is correctly connected to Bluetooth Box E
- make sure you are within the range
- make sure the Bluetooth is enabled and the device is connected to Bluetooth Box E. Volume level is
properly set
