7
to sit at room temperature for 12 hours prior to use.
Remember! The producer is in no way responsible for damage to the device or injury to the
operator in the event of incorrect operation /care of the device.
6
Counter operation
Preparation
• Connect the power cord to the device
• Turn power switch ON
• Counter starts
• “0” is shown on the main display 2
• If an error message occurs (on display 2), see Table 8
6.1. Counterfeit detection
The PRO 95U model incorporates UV detection. Press the “
UV
” button to switch UV detec-
tion ON/OFF (indicator lights up if ON). When a banknote with suspicious UV reflection prop-
erties is scanned, the counter stops and will display an error message “CF-1”. The suspicious
banknote will remain on the top of the stack.
6.2. Counting procedure
ATTENTION! In order to avoid errors during counting, examine banknotes and put aside the
following:
• any banknote that has been repaired with white paper, tape, or another foreign substance
• any banknote that has been exposed to water or “washed”
• any banknote that is excessively dirty or worn
• any banknote that is torn
Banknote should be placed in a neat stack before being placed into the hopper!
• Banknotes are to be placed in the hopper
• The counter will start counting automatically after a second
• The display 2 will show the counting results
• Repeat again up to Table 6.2., when necessary
• Press “
START/STOP
” button to reset display 2 when finished
• If an error occurs during counting, see Table 8
6.3. Batch mode
(Counting mode for a specified number of banknotes)
• Enter a number corresponding to the amount of banknotes for the desired batch size on the
display (Fig.2-1) by pressing the digit buttons (Fig. 2-8)
• Repeat from the beginning of Table 6.2., when necessary.
• Remove banknotes from the stacker
• Add banknotes if necessary
• Press “
CLR
” button to reset the display and exit batch mode
• If an error occurs during counting, see Table 8
• Repeat from the beginning of Table 6.2.
6.4. Summation mode
• Press “
ADD
” button and the LED indicator will light up
• Repeat operations up to Table 6.2.
• When there are no more banknotes in the hopper, remove banknotes from the stacker
• Put a new stack of banknotes into the hopper
• Repeat from the beginning, when necessary
• The display 2 will show the total result of counted banknotes