background image

11

25

26

110

108

Hexagonal 

Holes

 9.  Insert the Right Upper Body Arm (25) into the 

Right Upper Body Leg (26).

 

Attach the Right Upper Body Arm (25) with two 
M8 x 38mm Bolts (108) and two M8 Locknuts 
(110). 

Make sure that the Locknuts are in the 

hexagonal holes.

 

Repeat this step to attach the Left Upper 
Body Arm (27) to the Left Upper Body Leg 
(not shown).

 10. Identify an Upper Body Cover A (31) and an 

Upper Body Cover B (32) and orient them as 
shown.

 

Attach the Upper Body Cover B (32) to the 
Right Upper Body Arm (25) with two M4 x 16mm 
Screws (97).

 

Then, press the Upper Body Cover A (31) onto 
the Upper Body Cover B (32).

 

Repeat this step on the other side of the 
elliptical.

31

32

97

25

9

10

27

27

11

 11. Identify the Right Pedal Arm Cover A (41) and 

the Right Pedal Arm Cover B (42) and orient 
them as shown.

 

Attach the Right Pedal Arm Cover B (42) to 
the Right Pedal Arm (37) with two M4 x 16mm 
Screws (97).

 

Then, press the Right Pedal Arm Cover A (41) 
onto the Right Pedal Arm Cover B (42).

 

Repeat this step on the other side of the 
elliptical.

41

97

37

42

Summary of Contents for ZE 6





























Reviews: