Pro-Form PFTL39110.0 User Manual Download Page 19

19

HOW TO FOLD THE TREADMILL

To avoid damaging the treadmill, adjust the incline

to the lowest position before you fold the treadmill.

Then, remove the key and unplug the power cord.

CAUTION: You must be able to safely lift 45 lbs. (20

kg) to raise, lower, or move the treadmill.

1. Hold the metal frame firmly in the location shown

by the arrow below.

CAUTION: Do not hold the

frame by the plastic foot rails. Bend your legs

and keep your back straight.

Raise the frame

about halfway to the vertical position.

2. Hold the treadmill firmly with your right hand as

shown. Pull the latch knob to the left and hold it.

Raise the frame until the hole in the platform cush-

ion is aligned with the latch pin. Then, slowly re-

lease the latch knob;

make sure that the latch pin

is fully inserted into the platform cushion.

To protect the floor or carpet, place a mat under the

treadmill. Keep the treadmill out of direct sunlight.

Do not leave the treadmill in the storage position in

temperatures above 85° F (30° C).

HOW TO MOVE THE TREADMILL

Before moving the treadmill, fold it as described at the

left.

CAUTION: Make sure that the latch pin is fully

inserted into the platform cushion. Moving the

treadmill may require two people.

1. Hold the frame and one of the handrails, and place

one foot against a wheel.

2. Pull back on the handrail until the treadmill will roll

on the wheels, and carefully move it to the desired

location.

CAUTION: Do not move the treadmill

without tipping it back, do not pull on the frame,

and do not move the treadmill over an uneven

surface.

3. Place one foot against a wheel, and carefully lower

the treadmill.

HOW TO LOWER THE TREADMILL FOR USE

1.

See drawing 2.

Hold the upper end of the treadmill

with your right hand as shown. Pull the latch knob

to the left and hold it. Next, lower the frame until it

is past the latch pin. Then, release the latch knob.

2.

See drawing 1 at the left.

Hold the metal frame

firmly with both hands, and lower it to the floor.

CAUTION: Do not hold the frame by the plastic

foot rails, and do not drop the frame. Bend your

legs and keep your back straight.

HOW TO FOLD AND MOVE THE TREADMILL

Frame

1

1

Handrail

Frame

Wheel

Engaged

Platform Cushion

Latch

Knob

2

Summary of Contents for PFTL39110.0





























Reviews: