7
3
2
28
59
59
33
44
1
79
Avoid pinching
the wires
3. Have another person hold the Upright (2) near
the Frame (1).
Make sure that the hexagonal
holes are in the indicated location.
Connect the Extension Wire Harness (44) to the
Wire Harness (79).
Slide the Upright (2) onto the Frame (1).
Tip: Avoid pinching the wires.
Attach the
Upright (2) with two M10 x 74mm Button Bolts
(28), two M10 Split Washers (59), and two M10
Locknuts (33).
Make sure that the Locknuts
are in the hexagonal holes.
Hexagonal
Holes
4. While another person holds the Upright
Extension (73) near the Upright (2), insert the
Extension Wire Harness (44) upward through
the Upright Extension.
Hold the upper end of the Extension Wire
Harness (44) and insert the Upright Extension
(73) into the Upright (2).
Tip: Avoid pinching the wire.
Attach the
Upright Extension (73) with three M10 x 25mm
Patch Screws (40) and three M10 Split Washers
(59).
4
2
73
59
Avoid pinching
the wire
44
40
40
59
