18
HOW TO USE THE MANUAL MODE
1. Begin pedaling or press any button on the
console to turn on the console.
When you turn on the console, the display will light.
The console will then be ready for use.
2. Select the manual mode.
Press the Manual Control button on the console to
select the manual mode.
If a wireless iFit Live module is not inserted into
the console and connected to iFit Live, the manual
mode will be selected automatically.
3. Change the resistance of the pedals as desired.
As you pedal, change the resistance of the pedals
by pressing the Resistance increase and decrease
buttons.
Note: After you press a button, it will take a
moment for the pedals to reach the selected resis-
tance level.
4. Follow your progress with the display.
The display can show the following workout
information:
Calories (Cals.)
—This display mode will show the
approximate number of calories you have burned.
Calories per Hour (Cals./Hr)
—This display mode
will show the approximate number of calories you
are burning per hour.
Distance (Dist.)
—This display mode will show
the distance that you have pedaled in miles or
kilometers.
Pulse
—This display mode will show your heart rate
when you use the handgrip heart rate monitor (see
step 5 on page 19).
Resistance (Resist.)
—This display mode will
show the resistance level of the pedals for a few
seconds each time the resistance level changes.
RPM
—This display mode will show your pedaling
speed in revolutions per minute (rpm).
Stride
—This display mode will show the total num-
ber of strides you have pedaled.
Time
—When the manual mode is selected, this
display mode will show the elapsed time. When an
onboard workout is selected, this display mode will
show the time remaining in the workout.
The matrix offers several display tabs. Press the
Display button until the desired tab is shown. You
can also press the increase and decrease buttons
next to the Enter button.
Speed
—This tab will show a profile of the speed
settings of the workout. A new segment will appear
at the end of each minute.
My Trail
—This tab will show a track that represents
1/4 mile (400 m). As you exercise, the flashing
rectangle will show your progress. The My Trail tab
will also show the number of laps you complete.
Calorie
—This tab will show the approximate
amount of calories you have burned. The height of
each segment represents the amount of calories
burned during that segment.
As you exercise, the workout intensity level bar
will indicate the approximate intensity level of your
exercise.
