background image

6

1.  With the help of a second person, place some of 

the packing materials (not shown) under the rear 
of the Frame (1). 

Have the second person hold 

the Frame to prevent it from tipping while you 
complete this step.

 

Attach the Rear Stabilizer (2) to the Frame (1) 
with two M10 x 122mm Screws (104) and two 
M10 Split Washers (105).

 

Remove the packing materials from under the 
rear of the Frame (1).

1

2

1

2

2

106

15

104

105

••  To hire an authorized service technician to 

assemble the elliptical, call 1-800-445-2480.

••  Assembly requires two persons.

••  Place all parts in a cleared area and remove the 

packing materials. Do not dispose of the packing 
materials until you 

 nish all assembly steps.

••  To identify small parts, see page 5.

••  In addition to the included tool(s), assembly 

requires the following tools:

one Phillips screwdriver 

one rubber mallet 

 

Assembly may be easier if you have your own set 
of wrenches. To avoid damaging parts, do not use 
power tools.

ASSEMBLY

2.  Press the Cover Mounts (106) on the underside 

of the Rear Stabilizer Cover (15) into the Rear 
Stabilizer (2). 

Summary of Contents for PFEL08011.2

































Reviews: