12
11
11. Identify the Right Upper Body Arm (9).
Orient the Right Upper Body Arm (9) and one of
the Upper Body Legs (6) as shown. Insert the
Right Upper Body Arm into the Upper Body Leg.
Attach the Right Upper Body Arm (9) to the
Upper Body Leg (6) with two M8 x 45mm Bolts
(76) and two M8 Jam Nuts (77).
Make sure that
the Jam Nuts are inside the hexagonal holes.
Do not fully tighten the Bolts yet.
Attach the Left Upper Body Arm (8) to the
other Upper Body Leg (6) in the same way.
Hexagonal
Holes
8
6
6
9
76
76
77
77
12
12. Using a small plastic bag to keep your fingers
clean, apply a generous amount of the included
grease to the axle on the right side of the
Upright (2).
Slide the Right Upper Body Arm (9) onto the
Upright (2).
Attach the Right Upper Body Arm (9) with an M8
x 20mm Screw (80) and an M8 Washer (33).
Repeat this step on the other side of the
elliptical.
9
33
80
2
Grease
