7
3. Attach a Wheel (86) with the M10 x 50mm Bolt
(4) and M10 Nut (33) that you removed in step
1.
Do not overtighten the Nut; the Wheel
must turn freely.
85
4
33
3
86
2. With the help of a second person, carefully tip
the treadmill onto its left side. Partially fold the
Frame (48) so that the treadmill is more stable;
do not fully fold the Frame yet.
Cut the tie securing the Upright Wire (77) to the
Base (85). Locate the tie in the indicated hole in
the Base, and use the tie to pull the Upright Wire
out of the hole.
Attach a Base Pad (81) to the Base (85) in the
location shown with a Base Pad Spacer (104)
and an M4.2 x 25mm Screw (2). Then, attach a
Base Pad in the location shown with only a M4.2
x 25mm Screw (2).
85
2
48
81
2
81
2
77
Tie
Hole
104
