background image

22

3.   Connect your tablet to the console.

   Press the iFit Sync button on the console; the 

console pairing number will appear in the display. 

Then, follow the instructions in the iFit Bluetooth 

Tablet app to connect your tablet to the console. 

   When a connection is established, the LED on the 

console will turn solid blue. 

4.  Record and track your workout information.

   Follow the instructions in the iFit Bluetooth Tablet 

app to record and track your workout information.

5.   Disconnect your tablet from the console if 

desired. 

   To disconnect your tablet from the console, first 

select the disconnect option in the iFit Bluetooth 

Tablet app. Then, press and hold the iFit Sync 

button on the console until the LED on the console 

turns solid green. 

   Note: All BLUETOOTH connections between 

the console and other devices (including any 

tablets, heart rate monitors, and so forth) will be 

disconnected.

HOW TO CONNECT YOUR HEART RATE MONITOR 

TO THE CONSOLE

The console is compatible with all BLUETOOTH Smart 

heart rate monitors.

To connect your BLUETOOTH Smart heart rate moni-

tor to the console, press the iFit Sync button on the 

console; the console pairing number will appear in the 

display. When a connection is established, the LED on 

the console will flash red twice. 

Note: If there is more than one compatible heart rate 

monitor near the console, the console will connect to 

the heart rate monitor with the strongest signal.

To disconnect your heart rate monitor from the console, 

press and hold the iFit Sync button on the console until 

the LED on the console turns solid green. 

Note: All BLUETOOTH connections between the 

console and other devices (including any tablets, heart 

rate monitors, and so forth) will be disconnected. 

THE OPTIONAL CHEST HEART RATE MONITOR

Whether your 

goal is to 

burn fat or to 

strengthen your 

cardiovascular 

system, the key 

to achieving the 

best results is 

to maintain the 

proper heart 

rate during your 

workouts. The optional chest heart rate monitor will 

enable you to continuously monitor your heart rate 

while you exercise, helping you to reach your personal 

fitness goals. To purchase a chest heart rate moni-

tor, please see the front cover of this manual.

Note: The console is compatible with all BLUETOOTH 

Smart heart rate monitors.

Summary of Contents for PETL79817.0





































Reviews: